Hey need help new here and first post! Hope for some help... Ok here goes, recently got a 76 Ironhead needed new wiring and few other things... So after getting the wiring job mocked up and making sure everything worked, a friend ( well maybe not any more lol) bumped the starter button against the frame and it arced... Up till this point the bike would start and run no problem. I went through everything I can think of the bendix selonoid all appears to work correctly but now when the starter button is pressed the bendix comes out engages but stops and doesn't turn motor buy the starer just wines. I've tested the battery tried jumping with a car check selonoid took primary off bendix turns one way but not the other all seems to be good other than the motor not turning over.... Even tho the starter wines could the arc have burnt it up or something else? I've even checked all circuit breaks everything I can think of! Please any one got a suggestion?
↧