This is a Canadian model 48 that uses the taillight as running/brake light and the turn signals only for left/right signaling.
I chopped the fender more than half way up as well as i cut the struts. Everything is perfect, exactly as i wanted it. Now, i want to pick up an after-market retro looking taillight. I need to mount the taillight with license plate since the LEOs around this area are pretty severe with side mounted plates.
Anyway, i am not exactly sure how i would wire everything up seeing as there is a connector attached to the taillight now which is currently part of the piece i chopped. The turn signals actually connected into that connector which in turn connects to the main harness under the seat. Anyway, here is a wiring diagram of what things looked like stock. I would personally like to get rid of the connector at the old taillight and go straight with the wires into the harness. The new taillight has 3 wires (brake/running/ground)
Hopefully you guys can help me. Thanks in advance.
![]()
I chopped the fender more than half way up as well as i cut the struts. Everything is perfect, exactly as i wanted it. Now, i want to pick up an after-market retro looking taillight. I need to mount the taillight with license plate since the LEOs around this area are pretty severe with side mounted plates.
Anyway, i am not exactly sure how i would wire everything up seeing as there is a connector attached to the taillight now which is currently part of the piece i chopped. The turn signals actually connected into that connector which in turn connects to the main harness under the seat. Anyway, here is a wiring diagram of what things looked like stock. I would personally like to get rid of the connector at the old taillight and go straight with the wires into the harness. The new taillight has 3 wires (brake/running/ground)
Hopefully you guys can help me. Thanks in advance.
