So per my thread from last week, I pulled the trigger and tore my heads out to have them worked on by the guys at Hammer Performance. A few things have changed since that thread(including an increase in budget which at this point my more sane half has chosen the ignorance is bliss route).
Bike: 1995 883 XL
On order:
Hammer 1250 conversion
30 degree piston with reverse dome
Oversized valve conversion for the heads
impact 560 cams
(going to replace the oilpump gear while i'm in there)
Dyna2000i ignition
new jets.
Things that MAY change. I have an eye on a Mikuni HSR42 and trying to work the budget to get that in there.
The point of this thread is to see what every recommended for a well performing, reasonably priced, good looking, good sounding(most of this is all preference but I am looking for opinions) exhaust.
I have my eye on the Patriot defender however, if my research is right, I will need to fabricate a bracket for it.
I also need an aircleaner but I can replace that at any time without pulling 42 things off the bike so that will most likely be the last upgrade.
Thanks in advance for any input.
Bike: 1995 883 XL
On order:
Hammer 1250 conversion
30 degree piston with reverse dome
Oversized valve conversion for the heads
impact 560 cams
(going to replace the oilpump gear while i'm in there)
Dyna2000i ignition
new jets.
Things that MAY change. I have an eye on a Mikuni HSR42 and trying to work the budget to get that in there.
The point of this thread is to see what every recommended for a well performing, reasonably priced, good looking, good sounding(most of this is all preference but I am looking for opinions) exhaust.
I have my eye on the Patriot defender however, if my research is right, I will need to fabricate a bracket for it.
I also need an aircleaner but I can replace that at any time without pulling 42 things off the bike so that will most likely be the last upgrade.
Thanks in advance for any input.